WORKSHOP SERVICE

We refurbish your Brett. (Service currently available in Germany only)

WORKSHOP SERVICE

MODELL AUSWÄHLEN::

€43.50 *

Prices incl. VAT plus shipping costs

Free of shipping costs!

Ready to ship (delivery times)

WORKSHOP SERVICE

WE REFURBISH YOUR BRETT.
(ATTENTION: This service is only available in Germany.)


Wood does wear out - that's perfectly normal and it's also what gives wood its special charm.
Especially cutting boards do not have a particularly easy life due to daily contact with sharp blades.

However, most marks are superficial and can be repaired - even several times in a row.



That is why we are now offering the FRANKFURTER BRETT "workshop service":

We expertly refurbish aged boards, sand the surfaces, fill small holes and cracks and send the well oiled piece back to you almost as good as new - including a new bottle of wood care.

This is usually a good idea for boards that are more than 2.5 years old or that have been subjected to a lot of wear and tear.

(Freshly sanded boards are excellent to give away - in case you want to treat yourself to a larger board).

--
INCLUSIVE: 1 bottle BRETTPFLEGE special edition 250ml (with orange oil - smells divine!)
--

PLEASE SEE THE INSTRUCTIONS UNDER "SPECIFICATIONS"!

_________________

*THE SMALL PRINT

FINISHING
We sand the work surfaces evenly by approx. 1mm over the entire surface.
This is usually enough to remove 95 - 100% of light to medium cut marks and other everyday marks and to restore an evenly shining surface.
Particularly deep cuts (e.g. bread knife cuts or deep chipping marks) cannot be removed with this method.
In particularly severe cases, where we do not consider processing to be expedient, we will contact you beforehand to agree on the further procedure.

ENGRAVINGS & BRANDINGS
As a matter of principle, we do NOT guarantee engravings or logos.
It is to be expected that engravings and brandings will be affected, as the entire working surface is ground off.
However, personalised engravings will usually survive the first sanding without problems, but will simply appear slightly "flatter".

SHIPPING
You are responsible for shipping and properly packaging the board.
We will not be responsible for any damage caused by improper packing.
For shipments that arrive with us in obviously critical condition, we will additionally document the unpacking by video for proof.


However, the video documentation is not a prerequisite for deriving any kind of claim to documentation in the event of damage, but merely serves as a means of communication.
If a board arrives damaged:
In the case of minor damage, we will automatically attempt a repair.
In the case of major damage, we will try to contact you by telephone to agree on the further procedure and any additional costs that may arise.

 

DELIVERY ADDRESS:

Frankfurter Brett GmbH
WORKSHOP SERVICE
Christian-Pleß-Straße 11,
63069 Offenbach

 

DISCLAIMER
We guarantee professional and careful treatment of your product during the entire refurbishing process.

However, the sanding service does not constitute a warranty extension within the legal product warranty, nor are we liable for any damage that occurs afterwards and is not directly and clearly related to our service.

Should your board arrive damaged, the damage must also be documented immediately and reported to us within 2 working days.

FIELD REPORTS

Introduction

WE REFURBISH YOUR BRETT.
(ATTENTION: This service is only available in Germany.)


Wood does wear out - that's perfectly normal and it's also what gives wood its special charm.
Especially cutting boards do not have a particularly easy life due to daily contact with sharp blades.

However, most marks are superficial and can be repaired - even several times in a row.



That is why we are now offering the FRANKFURTER BRETT "workshop service":

We expertly refurbish aged boards, sand the surfaces, fill small holes and cracks and send the well oiled piece back to you almost as good as new - including a new bottle of wood care.

This is usually a good idea for boards that are more than 2.5 years old or that have been subjected to a lot of wear and tear.

(Freshly sanded boards are excellent to give away - in case you want to treat yourself to a larger board).

--
INCLUSIVE: 1 bottle BRETTPFLEGE special edition 250ml (with orange oil - smells divine!)
--

PLEASE SEE THE INSTRUCTIONS UNDER "SPECIFICATIONS"!

_________________

*THE SMALL PRINT

FINISHING
We sand the work surfaces evenly by approx. 1mm over the entire surface.
This is usually enough to remove 95 - 100% of light to medium cut marks and other everyday marks and to restore an evenly shining surface.
Particularly deep cuts (e.g. bread knife cuts or deep chipping marks) cannot be removed with this method.
In particularly severe cases, where we do not consider processing to be expedient, we will contact you beforehand to agree on the further procedure.

ENGRAVINGS & BRANDINGS
As a matter of principle, we do NOT guarantee engravings or logos.
It is to be expected that engravings and brandings will be affected, as the entire working surface is ground off.
However, personalised engravings will usually survive the first sanding without problems, but will simply appear slightly "flatter".

SHIPPING
You are responsible for shipping and properly packaging the board.
We will not be responsible for any damage caused by improper packing.
For shipments that arrive with us in obviously critical condition, we will additionally document the unpacking by video for proof.


However, the video documentation is not a prerequisite for deriving any kind of claim to documentation in the event of damage, but merely serves as a means of communication.
If a board arrives damaged:
In the case of minor damage, we will automatically attempt a repair.
In the case of major damage, we will try to contact you by telephone to agree on the further procedure and any additional costs that may arise.

 

DELIVERY ADDRESS:

Frankfurter Brett GmbH
WORKSHOP SERVICE
Christian-Pleß-Straße 11,
63069 Offenbach

 

DISCLAIMER
We guarantee professional and careful treatment of your product during the entire refurbishing process.

However, the sanding service does not constitute a warranty extension within the legal product warranty, nor are we liable for any damage that occurs afterwards and is not directly and clearly related to our service.

Should your board arrive damaged, the damage must also be documented immediately and reported to us within 2 working days.

Features

AUFARBEITUNG :::: 
Wir schleifen die gesamte Fläche ca 1 mm ab. Dies ist ausreichend, um nahezu alle regulären Schnittspuren restlos zu entfernen. Besonders tiefe Schnitte (zb Hackbeil oder geriffeltes Brotmesser) lassen sich unter Umständen nicht restlos entfernen.

KLEINE DEFEKTE & RISSE :::: Kleine Risse und Macken werden verfüllt, gespachtelt und nachgeschliffen. Die Füllstellen können farblich etwas vom Holz abweichen. Bitte bei zerbrochenen Brettern bzw schweren Schäden (starker Schimmelbefall usw) vorher mit uns in Kontakt treten, um die Reparaturaussichten zu besprechen.

GRAVUREN :::: Gravuren werden grundsätzlich überschliffen, um ein ebenmäßiges Holzbild zu erzielen. In der Regel überstehen die Gravuren den ersten Abschleifservice einwandfrei. Bei wiederholtem Abschleifen müsste die Gravur gegebenenfalls neu eingebracht werden. Bitte sprecht uns auch in diesem Fall im Vorfeld an. VERFÄRBUNGEN :::: Verfärbungen des Holzes können (je nach Ursache, zB Brandspuren einer sehr heissen Pfanne) tiefer gehen als die 1mm Schleiftiefe. Wir prüfen jedes Brett einzeln und versuchen immer eine ideale Lösung zu finden. 
Wir können aber aus oben genannten Gründen nicht garantieren, dass alle Spuren restlos beseitigt werden können.
Bitte geht im Zweifel immer davon aus, dass das Brett, was euch nach dem Abschleifen wieder erreicht, im Rahmen der Möglichkeiten ideal behandelt wurde - wir gehen in der Regel gerne ein paar Schritte extra, um das Ergebnis zu verbessern.

Specifications

1 - Artikel „Abschleifservice“ in den Warenkorb legen und bezahlen

2 - In der Bestellbestätigung per Email findet sich im Anhang ein PDF. DIESES Bitte ausdrucken und ausfüllen

3 - Das saubere Brett (OHNE BÜGEL) gut verpacken und mit einem Versand-Dienstleister Ihres Vertrauens an unsere Schreinerei senden.

4 - Wir arbeiten das Brett innerhalb von 4 Arbeitstagen auf* und schicken es frei Haus zurück.

WICHTIG: Ausgefülltes PDF bitte UNBEDINGT dem Paket beilegen, sonst können wir das Brett nicht zuordnen!

Decision support